ODF Configurator
1
Which frame size do you need?
2LINE ODF 220
Height 220cm, 42 U, up to 3,024 ports
2LINE ODF 180
Height 180cm, 33 U, up to 2,376 ports
2
Should the patch cables be guided away to the left or to the right?
Note: Do you need support with your patch cable management? We also offer patch cable overlength racks, racks for active technology and cable duct systems.
Right
Left
3
Do you want to use splitters?
Info: We can accommodate four splitters per splitter holder. This amounts to a total capacity of 88 splitters.
Yes please, mounted on the top of the frame
(no overhead cable duct possible)
Yes please, mounted within the top of the frame
(6 U less are available for the frame extension)
No, thank you!
4
Cable duct system
Info: Multiple selections possible. Ducts can be mounted both at the top and at the bottom. If you are planning several racks with patch cable management, you can send us an installation plan. We will then configure an integrated cable duct system for you, taking your patch cable management into account.
On the top of the frame
(Up to 3500 fibres)
In the frame at the bottom
(Up to 5000 fibres, there are 6 U less available for rack extension)
I need an extensive cable duct system and would be grateful for assistance with planning
Next5
Would you like to configure the frame already with modules?
Info: Here you can equip the extension of your frame with 2LINE Splice/Patch modules, 2LINE Splice modules, 2LINE Fanout modules and other custom-fit accessories.
Yes, with crimp splice protection
Yes, with shrink splice protection
No, I need an empty frame
6
Do you want to assemble your frame yourself or use our 2LINE All-In Service?
Note: Disassembled: Your frame is delivered in assemblies and individual parts and assembled by you on site. Alternatively, we offer you our All-In Service: We assemble your frame completely, equip it with your modules and accessories, so that you only have to take care of the installation. The frames are delivered lying on a palette. Please make sure that your premises allow transport to the desired installation site. The weight of the fully equipped frame can be up to 300 kg.
2LINE All-In Service
2LINE All-In Service assembly
Self-assembly
7
Do you need additional accessories?
Note: Multiple selections. Select your desired accessories from side panels, door sets, wall mounting and depth adapters as well as other offers to complete your configuration.
Door set 220
Door set 180
Door center hinge
Side panel 220
Side panel 180
Back cover 220
Back cover 180
Splitter holder inside
Amount
Splitter holder outside left side
Amount
Splitter holder outside right side
Amount
Splitter 1:32
Amount
Type
Splitter 1:16
Amount
Type
Splitter 1:8
Amount
Type
Breakoutholder left side
Breakoutholder right side
Cover plate roof
Wall mounting bracket 30
Cover for cable support plate
Next
Your selection
Weitere Infos
Lorem ipsum dolor sit amet, consetetur sadipscing elitr, sed di
Request configuration
You will receive an overview of your configuration in PDF format via e-mail after submitting the form.
Download your configuration as PDFOur configurator supports you in configuring your desired ODF. From the frame size to the use of splitters and cable duct system to the modules and accessories, you can specify everything in detail.
A simple click is all it takes to make the desired selection. You can undo the selection at any time by returning to a previous question.
If you are unsure, use the information buttons that you will find next to a number of selection possibilities.
Your selection appears on your personal notepad on the right, including quantities and item numbers. Below that, there are buttons for saving your current configuration, loading previously saved configurations and downloading and uploading configurations.
In the last step, you can request the desired configuration from Hauff-Technik GRIDCOM, whereupon our sales department will contact you.
A simple click is all it takes to make the desired selection. You can undo the selection at any time by returning to a previous question.
If you are unsure, use the information buttons that you will find next to a number of selection possibilities.
Your selection appears on your personal notepad on the right, including quantities and item numbers. Below that, there are buttons for saving your current configuration, loading previously saved configurations and downloading and uploading configurations.
In the last step, you can request the desired configuration from Hauff-Technik GRIDCOM, whereupon our sales department will contact you.
2LINE SPM HD
2LINE Splice/Patch module High Density
Available with LC connectors
Optionally for patch cable outlet left or right
Fiber G657.A1, connector grade B
3 (1U) / 6 (2U) / 9 (3U) drawers with 24 ports each
2 splice protectors 12x crimp each
Loose tube feed by means of miniflex tube
OuterØ: 5mm; InnerØ: 3,3mm
Available with LC connectors
Optionally for patch cable outlet left or right
Fiber G657.A1, connector grade B
3 (1U) / 6 (2U) / 9 (3U) drawers with 24 ports each
2 splice protectors 12x crimp each
Loose tube feed by means of miniflex tube
OuterØ: 5mm; InnerØ: 3,3mm
1U: 72 ports; 72 pigtails LC/APC, 36 couplings LC/APCdx
2U: 144 ports; 144 pigtails LC/APC, 72 couplings LC/APCdx
3U: 216 ports; 216 pigtails LC/APC, 108 couplings LC/APCdx
2U: 144 ports; 144 pigtails LC/APC, 72 couplings LC/APCdx
3U: 216 ports; 216 pigtails LC/APC, 108 couplings LC/APCdx
2LINE SPM ST
2LINE Splice/Patch module Standard
Available with LC, SC or E2000 connectors
Optionally for patch cable outlet left or right
Fiber G657.A1, connector grade B
2 (1U) / 4 (2U) / 6 (3U) drawers with 24 ports each
2 splice protectors 12x crimp each
Loose tube feed by means of miniflex tube
OuterØ: 5mm; InnerØ: 3,3mm
Available with LC, SC or E2000 connectors
Optionally for patch cable outlet left or right
Fiber G657.A1, connector grade B
2 (1U) / 4 (2U) / 6 (3U) drawers with 24 ports each
2 splice protectors 12x crimp each
Loose tube feed by means of miniflex tube
OuterØ: 5mm; InnerØ: 3,3mm
1U: 48 ports; 48 pigtails LC/APC, 24 couplings LC/APCdx / 48 pigtails SC/APC, 48 couplings SC/APC / 48 pigtails E2000 Huber & Suhner, 24 couplings E2000 dx Huber & Suhner
2U: 96 ports; 96 pigtails LC/APC, 48 couplings LC/APCdx / 96 pigtails SC/APC, 96 couplings SC/APC / 96 pigtails E2000 Huber & Suhner, 48 couplings E2000 dx Huber & Suhner
3U: 144 ports; 144 pigtails LC/APC, 72 couplings LC/APCdx / 144 pigtails SC/APC, 144 couplings SC/APC / 144 pigtails E2000 Huber & Suhner, 72 couplings E2000 dx Huber & Suhner
2U: 96 ports; 96 pigtails LC/APC, 48 couplings LC/APCdx / 96 pigtails SC/APC, 96 couplings SC/APC / 96 pigtails E2000 Huber & Suhner, 48 couplings E2000 dx Huber & Suhner
3U: 144 ports; 144 pigtails LC/APC, 72 couplings LC/APCdx / 144 pigtails SC/APC, 144 couplings SC/APC / 144 pigtails E2000 Huber & Suhner, 72 couplings E2000 dx Huber & Suhner
2LINE SPM HD shrink
2LINE Splice/Patch module High Density shrink
Available with LC connectors
Optionally for patch cable outlet left or right
Fiber G657.A1, connector grade B
3 (1U) / 6 (2U) / 9 (3U) drawers with 24 ports each
4 splice protectors 6x shrink each
Loose tube feed by means of miniflex tube
OuterØ: 5mm; InnerØ: 3,3mm
Available with LC connectors
Optionally for patch cable outlet left or right
Fiber G657.A1, connector grade B
3 (1U) / 6 (2U) / 9 (3U) drawers with 24 ports each
4 splice protectors 6x shrink each
Loose tube feed by means of miniflex tube
OuterØ: 5mm; InnerØ: 3,3mm
1U: 72 ports; 72 pigtails LC/APC, 36 couplings LC/APCdx
2U: 144 ports; 144 pigtails LC/APC, 72 couplings LC/APCdx
3U: 216 ports; 216 pigtails LC/APC, 108 couplings LC/APCdx
2U: 144 ports; 144 pigtails LC/APC, 72 couplings LC/APCdx
3U: 216 ports; 216 pigtails LC/APC, 108 couplings LC/APCdx
2LINE SPM ST shrink
2LINE Splice/Patch module Standard shrink
Available with LC, SC or E2000 connectors
Optionally for patch cable outlet left or right
Fiber G657.A1, connector grade B
2 (1U) / 4 (2U) / 6 (3U) drawers with 24 ports each
4 splice protectors 6x shrink each
Loose tube feed by means of miniflex tube
OuterØ: 5mm; InnerØ: 3,3mm
Available with LC, SC or E2000 connectors
Optionally for patch cable outlet left or right
Fiber G657.A1, connector grade B
2 (1U) / 4 (2U) / 6 (3U) drawers with 24 ports each
4 splice protectors 6x shrink each
Loose tube feed by means of miniflex tube
OuterØ: 5mm; InnerØ: 3,3mm
1U: 48 ports; 48 pigtails LC/APC, 24 couplings LC/APCdx / 48 pigtails SC/APC, 48 couplings SC/APC / 48 pigtails E2000 Huber & Suhner, 24 couplings E2000 dx Huber & Suhner
2U: 96 ports; 96 pigtails LC/APC, 48 couplings LC/APCdx / 96 pigtails SC/APC, 96 couplings SC/APC / 96 pigtails E2000 Huber & Suhner, 48 couplings E2000 dx Huber & Suhner
3U: 144 ports; 144 pigtails LC/APC, 72 couplings LC/APCdx / 144 pigtails SC/APC, 144 couplings SC/APC / 144 pigtails E2000 Huber & Suhner, 72 couplings E2000 dx Huber & Suhner
2U: 96 ports; 96 pigtails LC/APC, 48 couplings LC/APCdx / 96 pigtails SC/APC, 96 couplings SC/APC / 96 pigtails E2000 Huber & Suhner, 48 couplings E2000 dx Huber & Suhner
3U: 144 ports; 144 pigtails LC/APC, 72 couplings LC/APCdx / 144 pigtails SC/APC, 144 couplings SC/APC / 144 pigtails E2000 Huber & Suhner, 72 couplings E2000 dx Huber & Suhner
2LINE FM ST
2LINE Fanout module Standard
Available with LC connectors
Optionally for patch cable outlet left or right
Fiber G657.A1, connector grade B
2 (1U) / 4 (2U) / 6 (3U) drawers with 24 ports each
Loose tube feed by means of miniflex tube
OuterØ: 5mm; InnerØ: 3,3mm
Available with LC connectors
Optionally for patch cable outlet left or right
Fiber G657.A1, connector grade B
2 (1U) / 4 (2U) / 6 (3U) drawers with 24 ports each
Loose tube feed by means of miniflex tube
OuterØ: 5mm; InnerØ: 3,3mm
1U: 48 ports; 48 pigtails LC/APC, 24 couplings LC/APC dx
2U: 96 ports; 96 pigtails LC/APC, 48 couplings LC/APC dx
3U: 144 ports; 144 pigtails LC/APC, 72 couplings LC/APC dx
2U: 96 ports; 96 pigtails LC/APC, 48 couplings LC/APC dx
3U: 144 ports; 144 pigtails LC/APC, 72 couplings LC/APC dx
2LINE FM HD
2LINE Fanout module High Density
Available with LC connectors
Optionally for patch cable outlet left or right
Fiber G657.A1, connector grade B
3 (1U) / 6 (2U) / 9 (3U) drawers with 24 ports each
Loose tube feed by means of miniflex tube
OuterØ: 5mm; InnerØ: 3,3mm
Available with LC connectors
Optionally for patch cable outlet left or right
Fiber G657.A1, connector grade B
3 (1U) / 6 (2U) / 9 (3U) drawers with 24 ports each
Loose tube feed by means of miniflex tube
OuterØ: 5mm; InnerØ: 3,3mm
1U: 72 ports; 72 pigtails LC/APC, 36 couplings LC/APC dx
2U: 144 ports; 144 pigtails LC/APC, 72 couplings LC/APC dx
3U: 216 ports; 216 pigtails LC/APC, 108 couplings LC/APC dx
2U: 144 ports; 144 pigtails LC/APC, 72 couplings LC/APC dx
3U: 216 ports; 216 pigtails LC/APC, 108 couplings LC/APC dx
2LINE SM
2LINE Splice module
Optionally for patch cable outlet left or right
2LINE cassette module with max. 12 slots (2U) or max. 18 slots (3U)
Loose tube feed by means of 1x flex tube (2U) or 2x flex tube (3U)
OuterØ: 21,0mm; InnerØ: 16,0mm
Optionally for patch cable outlet left or right
2LINE cassette module with max. 12 slots (2U) or max. 18 slots (3U)
Loose tube feed by means of 1x flex tube (2U) or 2x flex tube (3U)
OuterØ: 21,0mm; InnerØ: 16,0mm
2U: up to 144 splices
3U: up to 216 splices
3U: up to 216 splices
2LINE SM shrink
2LINE Splice module shrink
Optionally for patch cable outlet left or right
2LINE cassette module with max. 12 slots (2U) or max. 18 slots (3U)
Loose tube feed by means of 1x flex tube (2U) or 2x flex tube (3U)
OuterØ: 21,0mm; InnerØ: 16,0mm
Optionally for patch cable outlet left or right
2LINE cassette module with max. 12 slots (2U) or max. 18 slots (3U)
Loose tube feed by means of 1x flex tube (2U) or 2x flex tube (3U)
OuterØ: 21,0mm; InnerØ: 16,0mm
2U: up to 72 splices
3U: up to 108 splices
s
3U: up to 108 splices
