Menü öffnen
Suchen

de  en
Products
Company
de  en

Station features

The 2LINE PoP station can be customised in terms of colour and appearance - for example in a concrete, wood or clinker look. It is insulated and made of solid, monolithic reinforced concrete for high stability and durability.

Outdoor EVU - Power connection

The 2LINE PoP has an external EVU power connection, which means that technology and energy supply are physically separated from each other. Various meter variants are available, including electronic household meters (eHz) and three-point pick-ups. The installation is carried out in accordance with the energy supplier's specifications and requires their approval.

Transport and logistics

The PoP station is delivered to the installation site, including transport and crane services. Personal on-site support rounds off the turnkey handover. The site inspection as well as the necessary transport authorisations and barrier measures are included in our service.

Climate control

The insulated cladding of the PoP station improves energy efficiency by reducing heat transfer. This means that less cooling capacity is required, which saves operating costs - naturally in compliance with all legal requirements.

Door and access

The 2LINE PoP station is optionally equipped with electronic access control and an RC3 resistance class door - for increased burglary protection and secure access control.

UPS

The 2LINE PoP can be equipped with an uninterruptible power supply (UPS), the bridging time of which is customised to the customer's requirements. The rectifier and battery capacity are designed according to the required power. The UPS compensates for power fluctuations and failures by temporarily supplying connected devices via batteries.

ODF system

At the heart of the PoP station is a modular optical fibre distributor that ensures cable routing in line with bending radii. It is available in versions with up to 42 U (3,024 ports) or as a special size with 33 U (2,376 ports). Features include intelligent patch cable routing, cable feed from above or below, mirror-inverted design and a flexible, lightweight construction. Delivery is pre-assembled and ready for connection according to customer requirements.

Splice/patch modules

The 2LINE ODF HD modules are pre-assembled units with pigtails and couplings, available in 1, 2 or 3 U. Each compressed drawer offers 24 connectors - with up to 9 drawers per module, depending on the version. LC connectors are used, which means that up to 3,024 ports can be achieved with 42 U and up to 2,376 ports with 33 U. Miniflex hoses secure the loose tube feed, while patch cables and fibres are routed with bending radii. The modules are also available mirror-inverted.

2LINE Optical Distribution Frame ODF 220 Active

Optical distribution frame

2LINE ODF 220 Active

The distribution rack for active technology enables the installation of 19’ or ETSI components and offers integrated patch cable routing, either on the right or left. Available in standard sizes up to 42 U (2200x900x300) or as a special size with 33 U (1800x900x300), it impresses with its modular design, flexibility and short assembly times. The doors are equipped with a swivelling lever for a locking cylinder, and the side panels provide a secure side closure. A mirror-inverted structure is also possible.

Installation

The installation of the 2LINE ODF system and the distribution rack for the active technology is carried out professionally, as is the commissioning of electrical components such as air conditioning and UPS. All work is carried out in accordance with the applicable VDE guidelines to ensure maximum safety and functionality.

Raised floor

The raised floor is used to lay cables safely and to store excess lengths. At the same time, cold air from the air conditioning technology is channelled directly to the active technology via the raised floor. Standard heights for the basement area are 60 cm or 80 cm. Alternatively, the system can also be designed without a raised floor with an additional cable compartment.

Single wall insert

for setting in concrete

HSI150 K/X

The HSI (Hauff Snap-In) modular cable entry system is used to insert pipework into the 2LINE PoP station.

Internal EVU - power connection

The power connection within the 2LINE PoP station is made via an integrated sub-distributor, which means that no separate housing is required on the outside of the station. This ensures a compact and space-saving solution.

2LINE KKS

Cable duct system

2LINE KKS

The 2LINE cable duct system is available both in the version for mounting on top of and below the ODF system. It is based on a flexible, modular plug-in system and is available in various elements - straight, right-angled and in different lengths. The patch cables are routed in compliance with the minimum bending radii, which are ensured by protected insertion elements in the racks. Installation is simple and requires no special tools.

Monitoring system

Optionally, the PoP station can be equipped with a comprehensive monitoring system that includes a door contact, smoke detector, motion detector, water sensor, temperature sensor and an RFID reader for access control. A surveillance camera can also be installed to further increase the security of the station.

Learn more

PoP-Stations

As a solution maker for passive network infrastructure, we cover all network levels with our product portfolio. Before the optic fibre can make its way to the end user, a main distributor, the PoP (Point of Presence), is required first.

Together with our partners, we offer our 2LINE PoP-Stations in different versions as a turnkey solution with all the necessary components for successful operation. The 2LINE ODF system completes the PoP interior with pre-assembled cabinets for passive and active technology and our patch cable management system. Our multi-functional enclosures are used as Mini-PoPs, equipped with active and passive technology and, if required, supplemented by an active cooling system - our 2LINE Whisper-PoP.